PRODUCTS

Portable pneumatic tube cleaners used hollow air craft quality shaft of different diameters s per tube I.D. to be cleaned which can be coupled together to form length of the tube to be cleaned.
Water flows through the hollow tube & flushes out deposits that are loosened by the cleaning tools attached to hollow shaft. Tools used for cleaning are carbide drills, for severely clogged tubes, brushes for light deposits & buffing tools for final polishing. The rotation of air motor & the water flow are controlled independently.

Note:

1. Model BC-20 is generally used for oil coolers, small heat exchanger and condensers.
2. Model BC-750 is generally used for large diameter tubes of process equipment condensers and heat exchangers.
   
   

PORTABLE PNEUMATIC TUBE-2 CLEANER ACCESSORIES

• Hollow Drive Shaft :  4ft.(1.2m) long aircarft quality steel shaft to connect to drive.

Model DS-300 to DS-500

Model DS-562 to DS-750



• Hollow Driven Shaft :  4ft.(1.2m) long aircarft quality steel shaft to connect to drive.
  Order Quanities based on length of tube to be cleaned.

Model DS-300 to DS-500

Model DS-562 to DS-750



• Drive Coupling :  To Couple hallow drive shaft to drive.

Model DS-300 to DS-500

Model DS-562 to DS-750



• Shaft Coupling :  To Couple 2 hallow Shaft together.

Model DS-300 to DS-500

Model DS-562 to DS-750



• Strater Drill :   To make pilot hole in deposits of completly clogged tubes.

Model DS-312 to DS-500

Model DS-562 to DS-750